发布日期:2022-03-28
实施日期:2022-07-01
主编部门:中国建筑一局(集团)有限公司,中建市政工程有限公司,中铁建设集团基础设施建设有限公司
主编单位:中国建筑一局(集团)有限公司,中建市政工程有限公司,中铁建设集团基础设施建设有限公司
主要起草人:曹光,陈玮,张军,李松,韩宝江,孟庆礼,季文君,祁明军,张胜良,王刚,庄璐,敖长江,姚传联,高成富,张艳秋,张清林,白士新,米博,商冬凡,王保平,李小利,赵宇石,王冲,任欢,牛乐,邓委,尹学军,张金文,王学波,孟学敏,刘斌,包汉营,王文正,张燕,肖剑,卢明,李胜松,许鸿亮,张惠丽,于艺林,李新,陈浩,韩锋,李晓阁,郭理修,张立业,陈贺,黄日生,牛文,吴永哲,杨国富、张悦,贾鸿鹏,韩雪
出版社:XXX
标准书号:DB11/T 1974-2022
出版时间:2022-03-01
目录
前言
1 总则
2 术语
3 基本规定
4 施工准备
4.1 一般规定
4.2 临时设施
4.3 既有管线探测、保护与改移
4.4 既有建(构)筑物调查与保护
5 管廊结构施工
5.1 一般规定
5.2 明挖法施工
5.3 盖挖法施工
5.4 浅埋暗挖法施工
5.5 盾构法施工
5.6 预制顶推法施工
5.7 附属结构及接驳结构施工
6 附属设施系统施工
6.1 一般规定
6.2 排水系统
6.3 消防系统
6.4 通风系统
6.5 供电系统
6.6 照明系统
6.7 监控报警系统
6.8 智慧管理系统
6.9 标识系统
7 入廊管线施工
7.1 一般规定
7.2 给水、再生水管道
7.3 排水管道
7.4 电力电缆
7.5 通信管线
7.6 热力管道
7.7 燃气管道
8 监控量测
8.1 一般规定
8.2 变形监测控制网
8.3 现场巡查
8.4 周边环境监测
8.5 结构变形监测
9 绿色施工
9.1 一般规定
9.2 环境保护
9.3 资源节约与循环利用
9.4 职业安全与健康
附录A 施工监测技术要求
本规程用词说明
引用标准名录
Contents
1 General Provisions
2 Terms
3 Basic Requirements
4 Construction Preparation
4.1 General Requirements
4.2 Makeshift Facilities
4.3 Existing Pipelines Survey,Protection and Relocation
4.4 Existing Buildings Survey and Protection
5 Utility Tunnel Structure Construction
5.1 General Requirements
5.2 Open Cut Method
5.3 Shallow Undercutting Method
5.4 Shield Method
5.5 Covered Excavation Method
5.6 Precas Incremental Launching Method
5.7 Appurtenant Structure and connection StructureConstruction
6 Appurtenant Facilities Construction
6.1 General Requirements
6.2 Support and Hanger System
6.3 Fire Preventing System
6.4 Ventilation System
6.5 Power Supply System
6.6 Lighting System
6.7 Water Supply and Drainage System
6.8 Sign System
6.9 Monitoring and Alarm System
7 Connection Pipeline Construction
7.1 General Requirements
7.2 Water Supply and Regeneration Water Pipeline
7.3 Drainage Pipeline
7.4 Power Cable
7.5 Communication pipeline
7.6 Thermal Pipeline
7.7 Gas Pipeline
8 Monitoring Measurement
8.1 General Requirements
8.2 Deformation Monitoring Control Network
8.3 Existing Pipelines Monitoring
8.4 Existing Buildings Monitoring
8.5 Construction Monitoring
9 Green Construction
9.1 General Requirements
9.2 Environmental Protection
9.3 Resource Saving and Recycling
9.4 Occupational Safety and Health
Appendix A Deformation Joint Should Be Set at Connection Position
Explanation of Wording in This Specification
List of Quoted Standards